Title:DG BOSS: Electro/Mechanical Maintenance Technician (FN)Maintenance personnel shall wear and use personal safety equipment, including but not limited to, a protective helmet, safety shoes, gloves, and eye protection.Performs inspection, maintenance, and repair of antennae and associated equipment (i.e coupler and transmission line) to ensure they are safe, fully functional, and operational such that the intended purposes are continually met and maximum life is sustained as referenced in Antenna High-Frequency Maintenance Manual (Red Book).The systems and equipment include all antennas, antenna systems, antenna components, associated baluns with ground or ground radial systems, transmission line systems, cables, structures, and all support and auxiliary equipment.Responsible for installation, maintenance, and repairs of the antennas i.e., Inverted Cones, Conical Monopole, High Take Off Angles (HTOA), Hermes Loop Array, AFRTS, R-Site Building 201, Vertically Polarized Omni-Directional Broadband Antenna (VOBA), Spiral Cone, Horizontally Polarized Log-Periodic, Horizontally Polarized Directional Broadband Antenna (HOBA), Rotatable Log Periodic Antenna (RLPA).Performs other duties as assigned to meet organizational/operational objectives.Basic Qualifications Have working knowledge and technical experience with the antenna outside plant equipment, erection equipment, standard safety procedures, and experience in the use of tools or possess the potential to be trained on the job for journeyman-level work.No fear of heights and mechanically inclined in the use of hand tools and no color blindness.Must speak, read, and understand the English Language.Must pass overseas medical screening and be in good health.Must have a valid driver's license with the following license codes (B, B1, B2, C, D) and be able to operate assigned vehicles and/or equipment.Preferred QualificationsJOB SPECIFICATIONS: SPECIAL CERTIFICATION OR TRAININGEnsures all antenna maintenance personnel receives a Radio Frequency Radiation Hazards safety training course before the performance of any antenna-related work.Ensures personnel is physically capable of climbing the antenna structure and working aloft.Electrical Safety TrainingAdult CPR/AED Training from American Red CrossEDUCATION:Must be at least a High School, Technical, or Vocational Course graduate is required.EXPERIENCE:Must have at least three (3) years of experience working on the types of antennas and antenna components and in Antenna Maintenance operations.